fleet one logo
comdata logo
efs fleet card logo
visa logo
discover financial services logo
mastercard logo
american express logo

Preparing Your Motorcycle for Towing: A Step-by-Step Checklist

motorcycle towing checklist prepare motorcycle for towing

To guarantee your motorcycle’s safety and the effectiveness of its towing procedure, you must prepare thoroughly beforehand. Motorcycle towing in Naperville suggests professional planning, whether you’re shipping your bike to be repaired, relocated, or transported to a rally. Follow this guide to learn the essential steps for getting your two-wheeler towed.

1. Choose the Right Towing Method

Here are the best towing techniques for your motorcycle:

  • Motorcycle Trailer – An easy-to-load and unload platform that’s the safest way to transport a bike.
  • Flatbed Truck – A substitute for the motorcycle trailer that’s just as good.
  • Tow Dolly – The front wheel of the bike is off the ground while the back wheel is on the road.
2. Gather Necessary Equipment

Before towing, make sure all the equipment is in good working order and right for the motorcycle. Sturdy ratchet straps to secure the bike, wheel chocks for stability, soft loops to protect the bike from scratches, and a ramp for loading and unloading.

3. Inspect Your Motorcycle

Check the fluid and tire pressure levels of your two-wheeler. Fasten any loose components to prevent them from falling off. Disconnect the battery. Finally, make sure the bike is clean and check for any existing damage to know if something happened during the transport.

4. Prepare the Trailer or Truck

Make sure the trailer is in good shape, with its tires inflated correctly and its lights working. To facilitate loading, clear the trailer bed, have the wheel chock ready at the center of the platform and set up the ramps. The trailer should be right for the weight of the motorcycle.

5. Load and Secure the Motorcycle

The professionals of motorcycle towing service in Naperville, IL, advise using a strong ramp and an assistant in the loading process. Push the bike up the ramp, don’t ride. Fasten the motorcycle to firm loops with the use of strong straps. Alight the front wheel to the wheel chock. Periodically check the tension while traveling.

6. Test Stability

Check for movement by gently rocking the bike and tightening the straps if needed. Make sure the motorcycle stays steady and upright. For a safe trip, start out driving slowly and keep an eye out for any signs of instability. Make momentary stops if there’s a need to make adjustments.

7. Drive Cautiously

Keep your speed constant, steer clear of abrupt stops or sharp turns, extend your following distance, and be on the lookout for humps and potholes. In other words, make sure that the trip to your destination is as smooth as possible, with no sudden movements

8. Unloading

Park on a level surface and make sure the bike is balanced before removing the straps. With the help of your assistant, gently guide it down the ramp. Once the bike is on the ground, check it for any damage that may have happened during the trip.

Off You Go After We Tow

Your bike can arrive safe and sound if proper precautions are observed. Those who provide motorcycle towing in Naperville remind us to select a towing method beforehand, gather the necessary equipment, load the bike properly, secure it well, and unload it with care. For expert service in transporting your motorcycle, get in touch with us at Classic Towing at 630-392-6844.

Skip to content